Revo REHVDPTZ22-1 Guia de Instalação

QUICK INSTALLATION GUIDE 22X REVO TRAX DOME CAMERA Model No.: REHVDPTZ22-1 (DC 12V 1.0A) REVO AMERICA 700 FREEPORT PARKWA

Chapter 3 — Program and Operation 3.1 Dome Camera Selection Before you program or operate a dome camera, you must select the dome camera by pressin

Chapter 4 — Operation by Web Browser The network camera can be used with Windows operating system and browsers. The recommended browsers are Intern

4.2 Access from the internet Access from the internet once connected, the network camera is accessible on your local network (LAN). To access the vid

1) General controls The video drop-down list allows you to select a customized or pre-programmed video stream on the live view page. Stream profil

The PTZ button activates a pop-up window for Pan, Tilt and Zoom control. Use this scale to control the volume of the speakers. Use this sc

15 Note: If the password is lost, the network camera must be reset to the factory default settings. 4.6 Resetting to the factory default settings To

22X REVO TRAX DOME CAMERA 50303232A

Chapter 1 — Introduction 1.1 Features The dome camera and the keyboard controller, PC software makes up the building blocks for any surveillance/se

Chapter 2 — Installation and Configuration 2.1 Package Contents The dome camera is design to a compact, small size, hard dome camera housing. The

2.2 Installation The dome camera is for use in surface or pendent mounting applications and the mounting member must be capable of supporting loads o

CAUTION: Before installing mounting bracket to surface pre-adjust the four mounting screws "A" on the base of the dome camera to best matc

2.3 Basic Configuration of Dome Camera System No. Wire Color Description 1 Red: 12VDC+ White: 12VDC- Main Power: 2pin terminal 2 Pink, Bro

2.4 Setting Dome Camera Address (ID) To prevent damage, each dome camera must have a unique address (ID). When installing multiple dome cameras usin

2.6 IP Assignment When the dome camera, encoder or decoder is first connected to the network it has no IP address. So, it is necessary to allocate an

2.7 Getting Started Once installed apply power to the dome camera. The dome camera will start a configuration sequence. 001 AF