Revo REHXN0412-1 Manual de Instruções

INSTRUCTION MANUAL REHXN0412-1 REVO ELITE HDNetwork Box Camera Please read this manual thoroughly before use, and kee

Note: Video Output is used for an easy zoom and focus control when installing lens. After lens installation, you must set Video Switch to Off to provi

2. IMPORTANT: Plug the connector from the lens into the auto iris jack on the back of the camera. The connector is polarized and can only be inserted

2. Attach the DC-type auto iris lens to the lens mount on the front of the camera. 3. Plug the connector into the auto iris jack on the side o

7. Fine tune the focus with the focus ring on the lens. 8. Remove the welder's glass from in front of the lens. 9. Adjust the iris o

2. Installation 2.1 Connection • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the network camera. Generally

3. Select the camera on the list and click right button of the mouse. You can see the pop-up menu below. 4. Select Assig

3. Operation The Network Camera can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firef

3.2. Access from the internet Once connected, the Network Camera on your local network (LAN) will be accessible via the internet. To access the netwo

3.4 Live View Page The live view page comes in eight screen modes: 1920x1080, 1280x1024, 1280x720, 720x480(576), 640x480, 352x240(288), and 320x240.

2) Control toolbar The live viewer toolbar is available in the web browser page only. It displays the following buttons: The Stop button stops the vi

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE V

3.5 Network Camera Setup This section describes how to configure the network camera, and is intended for product Administrators, who have unrestricte

1) Users User access control is enabled by default. An administrator can set up other users, by giving these user names and passwords. It is also poss

2) Network The network camera supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must

3) Video & Image • Stream1 Setting - Codec: The codec settings are separated into MPEG4 and H.264. H.264 is a

* MPEG4 ASP(Advanced Simple Profile): Its notable technical features relative to the Simple Profile, which is roughly similar to H.264, including &q

- JPEG frame rate: Same as the Stream1 Setting. - JPEG quality: Select the picture quality. If users want to have a high quality of fast im

- Sample rate: Select the required Sample rate (number of times per second the sound is sampled). The higher the sample rate, the better the audi

5) Date & Time • Current Server Time It displays the current date and time (24h clock). The time can be displayed in 12h

3.5.2 Video & Image  Basic Refer to “3.5.1 Basic Configuration > Video & Image” for more details.

 Appearance • Image Appearance This page provides access to the advanced image settings for the network camera.

FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, P

 AE & AWB This page provides access to set the exposure and white balance of the network camera. • Exposure

• White Balance Control This adjusts the relative amount of red, green and blue primary colors in the image so that the neutral colors are rep

 Privacy Masking The privacy masking function allows you to mask parts of the video image to be transmitted. You can set up to eight privacy masks a

 Webcasting The network camera can stream live video to a website. Copy the HTML code generated on the screen and pastes it in page code of the websi

3.5.3 Audio Refer to “3.5.1 Basic Configuration > Audio” for more details. 34

3.5.4 Event 1) Event-In  On Boot This is used to trigger the event every time the Network Camera is started. Select “Enable

 Alarm In Select “Enable” to activate the alarm event. The network camera supports 1 alarm input port. - Type: Choose the

 Manual Trigger This option makes use of the manual trigger button provided on the live view page, which is used to start or

 Motion Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. A total of

• Motion Detection Setting The behavior for each window is defined by adjusting the Threshold and Sensitivity, as described below. A motion index

IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do n

2) Event-Out  SMTP(E-Mail) The Network Camera can be configured to send event and error email messages via SMTP (Simple

- Login Method: Set the Weakest method allowed to the highest/safest method supported by the mail server. The most secure method is listed in the

• JPEG Setting - Pre-event: A pre-event buffer contains images from the time immediately preceding the event trigger. These are stored internall

 Alarm Out When the network camera detects an event, it can control external equipment connected to its alarm output port. Che

▼ Audio Alert When the network camera detects an event, it can output a predefined audio data file to an external speaker. Chec

Audio Recorder To use the Audio Recorder tool to make an audio file for Audio Alert function, you must install the Revo Remote Pro HD program on the i

 Record When the network camera detects an event, it can record the video stream to the Micro SD Card (not supplied) or N

Note2: Network File System (NFS) is a network file system protocol, allowing a user on a client computer to access files over a network in a manner si

3) Event Map The event map allows you to change the settings and establish a schedule for each event trigger from the Network C

• General Enter the name for a new event map. • Event In Select an event type in the drop down list. • Event Out - E-mail: Select ema

Contents 1. Description ------------------------------------------------------------------7 1.1 Components - --------------------------------------

2) RS-485 • RS485 setting -. Baud rate - Select a Baud Rate in the drop-down list. (Default 9600 bps) -. Data bits - Sele

3.5.6 System 1) Information You can enter the system information. This page is very useful when you refer device information after installation.

2) Security  Users User access control is enabled by default, when the administrator sets the root password on first access.

 HTTPS For greater security, the Network Camera can be configured to use HTTPS (Hypertext Transfer Protocol over SSL (Secure S

 IP Filtering Checking the Enable IP address filtering box enables the IP address filtering function. Up to 256 IP address ent

3) Date & Time • Current Server Time It displays the current date and time (24h clock). The time can be displayed in 12h

4) Network Network setting parameters can be set here. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be est

 Basic • IP Address Configuration: - Obtain IP address via DHCP: Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network admin

 DDNS • Internet DDNS(Dynamic Domain Name Service) When using the high-speed Internet with the telephone or cable network,

 RTP Have a setting for sending and receiving an audio or video on a real-time basis. These settings are the IP address,

4. Appendix -------------------------------------------------------------------- 72 4.1 Troubleshooting --------------------------------------------

 UPnP The Network Camera includes support for UPnP™. UPnP™ is enabled by default, and the Network Camera then is automaticall

 QoS Quality of Service (QoS) provides the means to guarantee a certain level of a specified resource to selected traffic on a network. Quality can

• Auto Traffic Control Set a limitation on user network resources by designating the maximum bandwidth. - Maximum bandwidth: In case of sharing

• NAT traversal Settings - Enable: when enabled, the network camera attempt to configure port mapping in a NAT router on

 Zeroconfig Zeroconfig allows the network camera to create and assign IP address for network cameras and connect to a network automatically.

 Bonjour The network camera includes support for Bonjour. When enabled, the network camera is automatically detected by operating systems and client

6) Maintenance • Maintenance Server - Restart: The unit is restarted without changing any of the settings. Use this me

Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for multi-configurations or for fir

3.6 Playback The Playback window contains a list of recordings made to the memory card. It shows each recording's start time, length, the event

Go to the last: go to the end of the video clip. Clip copy: copy the video clip. Zoom In: zoom in the video clip Full Screen: display

1. Description This manual applies to the REHXN0412-1 network camera. The Network Camera provides a network service for a progressive scan image sen

3.7 Help The Help information window will be provided as a popup window so that users can open and read it without a need for log-in. It will offer a

3.8 Resetting to the factory default settings To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance

4. Appendix 4.1 Troubleshooting Troubleshooting: If problems occur, verify the installation of the Network Camera with the instructions in this manu

4.2 Alarm Connection The following connection diagram gives an example of how to connect a network camera. 4.3 Preventive

4.4 Product Specification Main Item Specification Image sensor 1/2.7” Progressive scan RGB CMOS Active Array 1920(H) x 1080(V) Lens Auto iris, Foc

System Requirement for Web Browser Operating System: Microsoft Windows 98, Microsoft Windows ME, Microsoft Windows 2000, Microsoft Windows XP, Micros

REVO ELITE HD Network Box Camera

1.2 Key Features • Brilliant video quality The Network Camera offers the highly efficient H.264 video compression, which drastically reduces bandw

1.3 Overview • Front View NO Function 1 Back-focus adjusting locking screw 2 Auto IRIS lens connector • Rear View NO Functi